From the Sector

• Circularity at the centre

PG DENIM, the designer project by Paolo Gnutti, is ready for several important events scheduled for the autumn with ground-breaking interpretations and a new – increasingly green – business model. The occasion is its participation in the Blue Zone at Munich Fabric Start (Munich, 3-5 September 2019), a space which is increasingly often reserved for companies and projects with a high innovation rate in the world of denim.

PG DENIM at the German exhibition will be presenting important product innovations, but most notably new concepts developed for the S/S 2021 season. The focus here is on circularity, seen from a dual perspective: the product with the no longer traditional alternation of seasons, and a sustainabilityoriented approach.

Seasons meet

The new PG DENIM approach is geared towards overlapping seasonality, with less and less marked separations between projects dedicated to the spring-summer and fall-winter lines. The collections by PG DENIM can thus be increasingly defined as a “mix of products without seasonality”. Its focal points are innovation alongside the concept behind the initial idea, as opposed to just the season. This trend, explains Paolo Gnutti, CEO and R&D Head at PG DENIM, is also due to registering the fact that seasonality – in terms of environment and trends – is changing at an increasingly rapid pace. As a response to this situation, the choice has been made to design new collections starting from macro-trends and presenting fabrics for garments which are “easy to wear”, suitable for both warm and cold temperatures, in a true melting pot  of weights and sizes.

The lines for the previous season are thus reintroduced and restyled playing with weights and sizes, within a range where flock meets ultra-light fabric bases, or where vinyl is combined with typically summer weights which shift the fabric towards the world of “paper” with crispy touches, resulting in extraordinarily lightweight and strong items at the same time. Also the GARAGE DENIM has been upgraded with fluid and smoothed touched for garments which are easy to wear and have a strong personality.

Partnership with The Denim Window

The PG DENIM season is also enhanced by its partnership in The Denim Window project, which has resulted in a limited series of Creative Capsule Collections, derived from the idea of bringing together companies which had already worked or were working together, trying to highlight – through small capsule collections – the best of what had already been produced by traditional businesses. This has resulted  in three trailblazing capsules, two of which designed in partnership by PG DENIM and companies the likes of M&J Group, Cadica and Greenwear. Several copies of these collections have been made to travel the world, and – after the official presentation in July – they will have a special corner, The Denim Window, in the Bluezone at Munich Fabric Start.

The “Circular Programme” and the five “Rs” of sustainability

Also the PG DENIM approach to accountability in production processes has been enhanced by implementing the “Circular Programme”. As part of our corporate vision, Italian-style production is combined with compliance with what have become known as “the five Rs”, that is to say key concepts underlying the design and manufacturing model: Reduce (everything you are not using), Repair (everything you can), Reuse (anything available to you), Recycle (all that is left), Respect (everything around you).

This is the philosophy underlying each individual process at PG DENIM, and leading to new specific programmes which have been its business focus over the past few months:

1) Reducing the environmental impact during the fabric dyeing phase in reaction and sulphurbased processes, where the use of chemicals has been reduced by 40%, water consumption by 50% and CO2 emissions by 60%, which has also resulted in better penetration and a better result in the crocking process. This has led to producing 10 new articles which will be launched on the market.

2) Recycling all waste from processing and after use, creating a range of garments where cotton is actually obtained from regenerating these two kinds of waste. In this regard, PG DENIM for now is the only company on the market able to process with a percentage of recycled product exceeding 60% of the total, whereas the average for this kind of manufacturing is generally about 35%.

As regards regular production, on the other hand, PG DENIM follows stringent international standards, including Dtox, Reach and Gots in all its processing phases, also using BCI cottons and the Organic Cotton Standard for raw materials. Last but not least, it was recently awarded the GRS (Global Recycled Standard) certification.

Starting at the beginning of September, Filip Miermans will head the department of “Corporate Communications & Investor Relations” at Lenzing AG. In this capacity, he will report directly to Stefan Doboczky, Chief Executive Officer of Lenzing. Filip Miermans will succeed Waltraud Kaserer, who will continue to support Lenzing in the future in the field of public affairs.

Young, all-Italian dream-team will lead Pinko to a next level

Pinko looks ahead. Evolution & revolution are the keywords for the new management’s strategies. For the first time, President Pietro Negra will be supported by an all-Italian young team to build the success of the brand from now on. Research and innovation have always been part of the Pinko DNA: once again, they lead the path to cutting edge management.

The Pinko family grows with figures fully trained in the realms of fashion, luxury and retail, the actual Pinko R-evolution kickstart. “We pondered on Pinko’s future,” says Pietro Negra, President of Cris Conf in Fidenza (Parma), which he founded with his wife Cristina Negra and which controls Pinko. “This is just the beginning of a bigger project to be disclosed step by step in the next few months. The company turnover is a crucial point for any family business willing to preserve its independence. We believe in the power of younger generations. Therefore we created an all-Italian team to boost an already successful business model.”

Federico Bonelli, with experiences in Ernst & Young, The Boston Consulting Group and Bain & Company has been appointed General Manager. Emanuele Bianchi, previously in Diesel Coccinelle and Dolce & Gabbana, takes on as Marketing & Communication Director. Cecilia and Caterina Negra, the founders’ daughters and pivotal figures of Pinko’s success, confirm their roles leading respectively the Communication and the Creative department. Caterina Salvador becomes Director of Style and Product after working in Giorgio Armani, Hugo Boss, Calvin Klein, Dolce & Gabbana, Coin. More talents will be eventually hired.

• Monforts Textilmaschinen GmbH & Co. KG is expanding the team at its Advanced Technology Center (ATC) in Mönchengladbach, Germany, with the appointment of Jonas Beisel as a new textile technologist.

Having studied textile engineering in both Germany and China and taken an internship with Adidas before deciding he wanted to work in a more technical environment, 30-year-old Jonas will be transferring his theoretical knowledge into practice for customers at the ATC and at the plants of Monforts customers around the world.

“I’m really looking forward to meeting everyone at the forthcoming ITMA show in Barcelona as I familiarise myself with the fast-moving environment of the industry,” he said. “It’s good timing for me that ITMA,  which only takes place every four years, is happening now, so soon after my appointment.”

“The Monforts ATC has been extremely busy conducting customer trials and developing new processes recently, so it’s great to welcome Jonas to the technologists’ team,” added Monforts Vice President Klaus Heinrichs.

Paper Converting Machine Company (PCMC)— a division of Barry-Wehmiller and a leading supplier of high-performance converting machinery for the tissue, nonwovens and package-printing industries worldwide—is pleased to announce that Mike Shaw has accepted the position of Printing, Coating and Laminating Regional Sales Manager.

In this role, Shaw will be responsible for the sale of PCMC’s PCL products in the Midwest.
He brings nearly 25 years of sales experience in the offset printing industry to his new position, most recently serving as a district sales manager for web offset presses and finishing systems with manroland Goss web systems.

Shaw holds a Bachelor of Science in mechanical engineering from the University of New Hampshire.
“I’m excited that Mike has joined us,” said Rodney Pennings, PCMC’s Printing, Coating and Laminating Sales Director. “His product knowledge and sales experience will enhance our team, as we support our customers’ continual growth by providing the technology they need.” Shaw will operate from his home office in Milwaukee, Wisconsin.

Govier plans to scale the organization and take customer focus to the next level to drive growth
Kornit Digital, (NASDAQ: KRNT), a global market leader in digital textile printing technology, announced today that Chris Govier has been named Managing Director at Kornit Digital Europe GmbH.

Govier is a proven leader who brings broad experience of supporting customers with industrial digital transformation, a proven record of driving growth, and solid experience building and managing world class teams. In his new role, Govier will oversee Kornit Digital’s operations in Europe, the Middle East and Africa (EMEA) and will be instrumental in scaling up Kornit’s business.

Govier previously served in sales and general management roles at Xerox Corporation, and holds a BA from the University of Wellington, New Zealand.

Commenting on the appointment, Gilad Yron, Kornit Digital’s Executive Vice President of Global Business, said, “I welcome Chris on board as the new Managing Director of Kornit Digital Europe. He brings with him solid experience in the analog-digital transition in industrial print and deep regional understanding. Europe has traditionally been a strong performer for Kornit, and Chris’ expertise will help us grow the organization to the next level.”

“This is an incredibly exciting time to join Kornit Digital – their technology, coupled with a passion and drive will significantly disrupt the textile printing industry.” said Chris Govier. “EMEA represents a huge opportunity and I look forward to building on the fantastic success achieved so far.”

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

The National Council of Textile Organizations (NCTO) held its 16th Annual Meeting March 19-21 in Washington, DC.  Elected as NCTO officers for 2019 are:

• Chairman – Leib Oehmig, CEO of Glen Raven, Inc.
• Mr. Oehmig is CEO of Glen Raven, Inc., based in Glen Raven, North Carolina.  Glen Raven is an innovative leader in textile research and development, dying, spinning, weaving and finishing, and distribution and logistics.
• Vice Chairman – David Roberts, CEO of CAP Yarns, Inc.
• Mr. Roberts is CEO of CAP Yarns, Inc., based in Clover, South Carolina.  CAP Yarns is a specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers.  

• U.S. employment in the textile supply chain was 594,147 in 2018.  
• The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018.  
• U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018.  
• Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available.

Geringes Gewicht, Verzicht auf Kabel und eine hochautomatisierte Fertigung maximal individualisierter Bauteile: Die gedruckte Elektronik bietet der Luftfahrtbranche viele Vorteile. Auf dem LOPEC Kongress 2019 geben Dennis Hahn vom Flugzeugbauer Airbus und Max Seißler vom Beratungs- und Technologieunternehmen Altran einen Überblick über die besonderen Anforderungen an fliegende Bauteile. Gemeinsam arbeiten sie am Standort Hamburg mit gedruckter Elektronik für die Flugzeugkabine. Im Interview erläutern sie die Herausforderungen und Visionen.

F: Seit wann interessiert sich die Luftfahrtbranche für gedruckte Elektronik?

Dennis Hahn: Hochschulforscher haben schon vor 20 Jahren erkannt, dass gedruckte Elektronik für den Flugzeugbau interessant ist und ihre Ergebnisse bei Airbus vorgestellt. Die Materialien entsprachen damals aber noch nicht den extrem hohen Sicherheitsanforderungen der Luftfahrt. Aber seitdem hat sich viel getan. Zusammen mit zwei Fraunhofer-Instituten und Altran haben wir Demonstratoren entwickelt und gemeinsam mit Altran weisen wir gerade nach, dass die gedruckte Elektronik reif ist für Anwendungen in der Luftfahrt.

F: Welche konkreten Anforderungen müssen die Materialien erfüllen?

Dennis Hahn: Wir untersuchen zum Beispiel die Entflammbarkeit. Dafür werden die Folien, auf die wir die Elektronik drucken, für 15 Sekunden über eine offene Flamme gehalten, wieder entfernt und müssen sich, wenn sie Feuer gefangen haben, innerhalb von 14 Sekunden selbst löschen – ein harter Test für Kunststoffe. Wie sich eine Kombination aus Folie, Tinte und Coating verhält, können selbst unsere Brandexperten nicht vorhersagen. Deswegen mussten wir zahlreiche Materialien testen.

Max Seißler: Wir haben zwar von Anfang an versucht Risiken zu minimieren und Materialien verwendet, die bereits luftfahrtzertifiziert sind. Aber wenn wir diese Werkstoffe für andere Anwendungen und in neuen Kombinationen einsetzen, kommen Tests hinzu. Und die Entflammbarkeit ist nur ein Thema. Die Bauteile müssen beständig sein gegen Feuchtigkeit und Kondenswasser, gegen aggressive Reinigungsmittel, Insektizide, extreme Temperaturen, Vibrationen und mehr.

Dirk Büscher, Inhaber der Marc Cain Agency Düsseldorf, wurde zum neuen Vorstandsmitglied des Fashion Net Düsseldorf e.V. gewählt. Neben Klaus Brinkmann (bugatti GmbH), Angelika Firnrohr (Geschäftsführerin Fashion Net) und Uwe Kerkmann (Wirtschaftsministerium NRW) ist mit Dirk Büscher eine weitere Person aus der Modebranche im Vorstand vertreten, dessen Erfahrungen den Verein bereichern.

Nach seiner Station als Area Sales Manager und Key Account Manager bei René Lezard, ist Dirk Büscher seit über 14 Jahren erfolgreicher Inhaber der Marc Cain Agency Düsseldorf. Sein lokaler Bezug zur Stadt Düsseldorf und sein beeindruckendes Know-How über die Modebranche machten ihn zum geeigneten Kandidaten für diese Position.

„Ich habe die wichtige Arbeit von Fashion Net e.V. immer schon sehr gern unterstützt, da ich es richtig finde, den Modestandort so umfassend strategisch zu positionieren und so viele Aktivitäten umzusetzen. Als Vorstand werde ich beruflich wie auch persönlich mein Bestes geben, um die Themen der Landeshauptstadt Düsseldorf in Sachen Mode noch mehr zu pushen.“, so Dirk Büscher zu seiner neuen Position als Vorstandsmitglied.

Dirk Büscher ersetzt das ehemalige Vorstandsmitglied Philipp Kronen, welcher nach neun erfolgreichen Jahren leider aus persönlichen Gründen aus dem Vorstand ausgeschieden ist. Das Fashion Net Düsseldorf dankt Herrn Kronen für die Zusammenarbeit.