From the Sector

Carbios announces the appointment of two new members to its Executive Committee: Lionel Arras, Industrial Development Director, and Mathieu Berthoud, Sourcing and Public Affairs Director.

Lionel Arras joined Carbios’ teams in 2021 to support the industrial growth of PET enzymatic recycling technology as Industrial Development Director. He was appointed to the Company’s Executive Committee on May 2. An engineer who graduated from ENSIC Nancy and holds an MBA from the Lyon School of Management, Lionel Arras has more than 25 years of experience in the field of process engineering and the chemical industry.
At Carbios, he now heads a team of around 50 people mobilized around three major divisions:
- the industrial demonstration plant, inaugurated last September in Clermont-Ferrand,
- technological development,
- the first Reference Unit project, installed on the Indorama Ventures site in Longlaville, Meurthe-et-Moselle, France.

Lionel Arras, Carbios’ Industrial Development Director: “After the successful start-up of our industrial demonstration plant in Clermont-Ferrand, we are continuing our scale-up with the construction of the first enzymatic recycling plant in the world in Longlaville, France. Its launch, scheduled for early 2025, will enable the processing of 50,000 tons of post-consumer PET waste or the equivalent of 2 billion bottles. It is a great source of pride for me to be able to support Carbios in this strategic development phase.”

Mathieu Berthoud will join Carbios as Sourcing and Public Affairs Director on June 1, 2022. With more than 30 years of experience, including 10 years at Rhodia (now Solvay) and more than 20 years at Suez, in various commercial development or subsidiary management positions, he was most recently Technical and Performance Director for the Group’s recycling and recovery activities. A university-trained scientist, he also holds an MBA from HEC Paris. At Carbios, he will be responsible for securing the supply of PET waste for the future reference plant in Longlaville and the other industrial sites that will follow. He will also manage the Company’s public affairs.

Sustainable products that solve problems are the themes for this year’s finalists for the World of Wipes Innovation Award® that will be presented at the 16th annual World of Wipes® International Conference, June 27-30, at the Marriott Marquis in Chicago, Illinois.    

The three products vying for the award are an all-natural substitute for plastic fibers from Bast Fibre Technologies, a dual-textured 3D cleaning wipe from Fitesa and an environmentally safe flushable wipe from Nice-Pak.

INDA’s Technical Advisory Board selected the finalists from nearly 20 submissions based on their creativity, novelty, uniqueness, technical sophistication within the entire nonwovens wipes value chain and expansion of nonwovens use.

Kimberly-Clark Scott® 24-Hour Sanitizing Wipes was the recipient of the 2021 World of Wipes Innovation Award®.

This year’s in-person WOW International Conference is expected to draw 400-plus senior-level wipes professionals from all wipes segments, repeating last year’s strong live event that welcomed 475 wipes professionals from 14 countries to Atlanta, GA.

Finalists Announced
The three companies vying for the award (in alphabetical order) are:

• Bast Fibre Technologies – Sero® Hemp Fibers
• Fitesa – Dual Textured 3D Wipe
• Nice ’N CLEAN® SecureFLUSHTM Technology Flushable Wipes by Nice-Pak

WOW 2022 Conference Highlights
This year’s WOW conference sessions focus on: Circular & Sustainable Wipes, Supply Chain Challenges in Wipes, Nonwoven Substrates for More Sustainable Wipes, Trends in the Wipes Market and Among Consumers, Disinfection Concerns and New Technologies, Sustainable Wipe Packaging Trends, and Developments in Flushability Issues.

• with a ready-to-use swatch book dedicated to its DEEP DIVE sustainable dyeing system for dark, popular color basics

Archroma, a global leader in specialty chemicals towards sustainable solutions, launches its first ever ready-to-use swatch book, dedicated to creating sustainable black and dark color basics for faster time to market, to support its popular DEEP DIVE 2.0 system.

In 2018, Archroma launched its system solutions, a holistic approach aimed at addressing the growing expectations of the public in terms of keeping consumers, and the environment, safe.
Under the umbrella of "The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it's our nature", the Archroma systems are designed to create innovation and performance, whilst reducing the impacts on water, energy and other natural resources. The savings generated by these 70+ system solutions are demonstrated by Archroma's proprietary ONE WAY Impact Calculator, a ground-breaking tool launched in 2012 and continuously upgraded to simulate and optimize the footprint of textile application processes.

One of these systems, DEEP DIVE 2.0, has attracted a lot of interest not just from textile manufacturers but also from major brands and retailers worldwide. This popular system combines Drimaren® Ultimate HD, high-performance reactive dyes, with Blue Magic, an all-in-one pretreatment, Optifix® RUB New liq and Siligen® SIH-S New liq, a finishing treatment improved rub fastness and elegant hand feel, and an effective hydrolyzed dye remover, Cyclanon® XC-W New liq. The result is a shorter dyeing process combining right-first-time productivity, an improved fabric quality for longer lasting end-articles, as well as dramatically reduced water and energy utilization for brands committed to drive more sustainable production. Savings can reach up to 31% water and 34% energy.

The system is ideally suited for medium and dark cottons that have high performing fastness to light, multiple home laundering, saliva – in other words: apparel used for fashion, sports and baby’s wear.
At the same time, interested manufacturers and brands were facing the constant challenge of the fashion industry: time to market.

Often design is separated from execution in the factory and as such often designers initially select color that cannot be met in reality on different fibers or production routes in terms of color flare, metamerism, brightness, depth and now sustainable metrics – leading to lengthy delays and compromises in function, performance and/or color.
Archroma decided to create a dedicated tool aimed at addressing these issues. The company developed a new, unique book with color swatches made with the system that is ready to implement immediately into production thanks to engineered color standards and specifications.

This new tool offers a path to bridge the gap between “art and science” by providing at inspiration phase fully executable deep colors for cotton with controlled color metamerism and at the same time demonstrate water, energy and chemical savings, enhanced color fastness using safe chemistry for the end consumer. As a wardrobe staple, medium to dark shades are very popular with consumers. As a result, most brands and retailers often have and sell up to 60% of medium to dark shades in their seasonal palettes. It’s also the dark shades that use the most water and energy in production, so prioritizing these colors would have the largest ecological positive impact. The 48 colors swatched in the DEEP DIVE 2.0 book have been selected based on market popularity to allow brands and manufacturers to match that very stable market demand. Customers may use these colors as presented, or as inspiration whereby Archroma can create and match new custom colors using the DEEP DIVE 2.0 system.

Christophe Maestripieri, Global Head of the Archroma Brand Studio, the company’s department dedicated to support brands’ projects and innovations, explains: “We wanted to make sure our partners have all the tools they need to convert to more sustainable colors. We had the ideal dyeing system to do that, DEEP DIVE 2.0, with its high performance and reduced impacts on resources. Now, with the new DEEP DIVE 2.0 swatch book, we also offer to brands and manufacturers a way to select sustainable color options that meet the market demand for high quality medium to dark shades which can be implemented into production right away.”

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Lenzing – In the first quarter of 2022, the Lenzing Group, like the entire manufacturing industry, was significantly affected by the extreme developments in global energy and commodity markets. A predominantly positive market environment and the strategic focus on specialty fibers such as those of the TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ brands nevertheless ensured a solid revenue and earnings trend, with the effect of higher costs being largely offset.

•    Solid revenue and earnings performance despite extremely tight cost situation
•    Personnel changes on the Managing and Supervisory Boards – Stephan Sielaff appointed as the new CEO
•    Successful production start at world’s largest lyocell plant in Thailand
•    World’s largest pulp mill of its kind successfully started-up in Brazil
•    Premium textile brand TENCEL™ celebrates 30 years of sustainable fiber innovation

The Lenzing Interim Report 01-03/2022 is available on the company website.

A new interview study from NGO ChemSec shows that there is a gap between supply and demand when it comes to recycled materials, causing confusion and bottlenecks. Among other things, suppliers go out of their way using elaborate trade schemes to reach the coveted ”100% recycled” tag, which – it turns out – is not that important to consumer product brands. Far more crucial aspects, according to several major B2C companies, are:

• Honest communication towards customers
• Comprehensive information from suppliers
• Clear standards for recycled material

These are some of the conclusions from NGO ChemSec’s survey and interview study with 26 highly well-known consumer product brands. All brands responded to a survey concerning their current plastic use, as well as their needs, expectations and challenges regarding using more recycled material, to enable the shift to a circular economy for plastics.

Ten of the brands then participated in in-depth interviews on the same topics:, Essity, H&M, IKEA, Inditex , Lego, Mars,  SC Johnson, Tarkett, Unilever and Walgreens Boots Alliance.

Is non-mechanical recycling the answer?
Only about ten percent of all discarded plastics is recycled today, which is of course not nearly enough to achieve a circular plastics economy. Despite ambitions and initiatives to reduce plastics use – replacing the materials with other, more sustainable ones – the “plastic tap” is not expected to be turned off anytime soon. Quite the opposite, which makes raising the recycling rates more important than ever.

Although commercially viable, traditional (mechanical) recycling is afflicted with severe flaws, such as legacy chemicals, quality and functionality issues, as well as the lack of clean and sorted waste streams. The brands cited quality and functionality issues as the main obstacles for using more recycled material in their products.

This opens up for non-mechanical recycling, sometimes referred to as chemical recycling, where the plastic is either dissolved or broken down into smaller building blocks. Harmful additives and other hazardous chemicals can be removed in the process, and a material comparable to virgin plastic can be achieved – at least in theory.

So far, however, non-mechanical recycling technologies are costly, energy-intensive, and often require the addition of a great deal of virgin plastic to work – the very material that needs to be phased out.

The chain of custody models needs to be detangled
Apart from these production issues, there is a wide range of chain of custody models surrounding non-mechanical recycling, including mass balance and book & claim, which enable trade of credits or certificates for recycled material.

This cuts the physical connection between input and output, making it possible for a supplier to sell a material as “100% recycled”, when the actual recycled content could be zero.

This is a major issue for the brands ChemSec has spoken to, who value honest and correct communication towards customers. It turns out, perhaps somewhat surprisingly, that being able to slap a “made from 100% recycled plastic” label on a product is not all that important to brands.

To the brands, a physical connection between input (the discarded plastic waste headed for recycling) and output (the product at least partially made from recycled plastics) is far more important.

A physical connection, along with correct and adequate information from suppliers, as well as clearer standards and guidelines than what is available today, is what brands require to increase the use of recycled material and move us closer to a circular economy for plastics.

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

The Montex stenter also benefits from full digital control, with the Qualitex 800 PLC control system providing ease of operation and rapid access to line and management data, including full operating cost overviews, as well as maintenance monitoring.

Advances in digital technology mean that there are also now significant gains to be made in the retrofitting of existing Monforts machines with the latest automatic drives and control systems, going far beyond the basic replacement of spare parts.

“We will be emphasising the robustness and versatility of the Montex stenter for essential processes such as drying, stretching, heatsetting and coating at the Istanbul show,” said Monforts Area Sales Manager Thomas Päffgen.

“With energy prices rising steeply everywhere, features such as the MonforClean system, or the EcoBooster, in which waste heat from the drying process is used to pre-heat the drying air, are proving more invaluable than ever,” added Ahmet Kilic of Neotek. “Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation.”

• 2021 Annual Results: First IFRS consolidated statements integrating the subsidiary Carbiolice
• Plan to build a first industrial facility with a strong financial support from the French Government and the Grand-Est Region: site selected in France in partnership with Indorama Ventures, world leader in the production recycled PET
• Successful commissioning of a demonstration facility in September 2021 and confirmation of the validity of the scale-up of Carbios’ enzymatic recycling technology
• Takeover of Carbiolice and full integration in the consolidated IFRS statements since June 4th, 2021
• Appointment of Philippe Pouletty as Chairman of the Board of Directors on April 1st, 2022
• Appointment of Emmanuel Ladent as CEO of the Company on December 1st, 2021
• Strengthening of Carbios’ financial structure: capital increase of €114 million with French and International investors and €30 million loan from the European Investment Bank (EIB)
• Group’s cash position of €105 million as of December 31, 2021, which does not include the €30 million EIB loan due to be drawn down in the first half of 2022

Carbios, a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic, announced its operating and financial results for the year 2021. The financial statements as of December 31, 2021, were approved by the Company’s Board of Directors at their meeting on March 31, 2022.

“In 2021, Carbios achieved several technical and industrial milestones testifying of the soundness and successful execution of our strategy. The excellent results obtained from our demonstration plant confirms the industrial scale-up potential of our biological technology for the recycling of PET plastics and fibers. Together with our Consortium members, we also produced the world’s first food-grade PET sample bottles produced entirely from enzymatically recycled plastics; a world first. In addition, we have strengthened our financial structure by raising a landmark €114 million in May 2021 and we have taken full control of Carbiolice in June. In line with our objectives and with a strong financial support from the French Government and the Grand-Est Region, we will soon enable France to host the world’s first industrial facility dedicated to the biological recycling of plastics. Carbios’ enzymatic process will make it possible to recycle more than 50,000 tons of PET plastic waste per year,” comments Emmanuel Ladent, CEO of Carbios. “Our priority for 2022 is to finalize the terms of our partnership with Indorama Ventures, which will host the world’s first industrial facility operating our biological recycling process at its French production site in Longlaville. This year will also be about optimizing our commercial strategy, while continuing our innovation efforts on the end-of-life of other polymers.”

Click here to for further information.

• Innovation begins with creativity
• A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

Barmer Maschinenfabrik Aktiengesellschaft (Barmag) is founded in Barmen, located in the Bergische Land region, on March 27, 1922. The German and Dutch founders enter unchartered technological territory, one created as the result of a groundbreaking invention: in 1884, French chemist Count Hilaire Bernigaud de Chardonnet used nitrocellulose to produce the first so-called artificial silk, later known as rayon. The following decades see rapid development focusing on the search for synthetic textile fibers and their manufacturing technologies. As one of the first machine factories, Barmag battles its way through the eventful early years of the manmade fiber industry, the ‘Roaring Twenties’ and the Great Depression – and suffers the extensive destruction of its factories at the end of World War Two. Rebuilding is successful. With the unstoppable success story of purely synthetic plastic fibers such as polyamide, the company flourishes from the 1950s through to the 1970s, establishing sites in all international, for the textile industry at the time important, industrial regions and garnering prestige across the globe in the process. In the ups and downs of expansion, global competition and crises, Barmag reaches the very pinnacle of the market and becomes the preferred technological development partner for the manmade fiber industries in China, India and Turkey. The company has been a high-impact brand under the umbrella of the Oerlikon Group since 2007.

On the wings of innovation
Today, Oerlikon Barmag is a leading supplier of manmade fiber filament spinning systems and part of the Manmade Fibers Solutions business unit of the Oerlikon Polymer Processing Solutions Division. And our aspirations have not diminished: “The striving towards innovation and technological leadership has been, is and will always be part of our DNA”, emphasizes Georg Stausberg, CEO of Oerlikon Polymer Processing Solutions. In the past, this has been observable in such trailblazing innovations as the revolutionary WINGS generation of winders for POY in 2007 and WINGS for FDY in 2012. Currently, the focus of new and further developments is very much on digitalization and sustainability. Here, Oerlikon Barmag has – as one of the world’s first systems manufacturers – been implementing fully-networked smart factories for globally-leading polyester manufacturers since the end of the last decade. Within this context, digital solutions and automation are also helping to provide greater climate and environmental compatibility. This sustainability commitment is not only evidenced by the e-save label introduced for all products back in 2004: Oerlikon is endeavoring to also make all its sites carbon-neutral by 2030 and to acquire its energy exclusively from renewable sources. An ambitious target, whose achievement could be helped by the Oerlikon Barmag anniversary, states Georg Stausberg: “Innovation begins with creativity. And remembering the past provides plenty of motivation and inspiration for the future.”

The shareholders of Autoneum Holding Ltd approved all proposals of the Board of Directors at today’s Annual General Meeting and agreed to the proposed dividend of CHF 1.50 per share. Norbert Indlekofer becomes a new member of the Compensation Committee following the previously announced departure of This E. Schneider.

In accordance with Ordinance 3 on Measures to Combat the Coronavirus (COVID-19), the Board of Directors of Autoneum Holding Ltd decided to hold the 2022 Annual General Meeting without the physical presence of the shareholders. For this reason, the Company asked them in advance to exercise their rights exclusively through the independent voting proxy. He represented 66.9% of a total of 4 672 363 shares.

The shareholders approved the Annual Report, the Annual Financial Statements and the Consolidated Financial Statements for 2021 as well as the proposed appropriation of available earnings. A dividend of CHF 1.50 per registered share will be paid out as of March 29, 2022. This corresponds to a distribution of around CHF 7 million, or around 30% of the consolidated profit attributable to Autoneum shareholders.

Hans-Peter Schwald, Chairman of the Board of Directors, emphasized in his video message that the return to profitability and the distribution of a dividend are to be viewed as a positive sign and a success, especially given the challenging environment. CEO Matthias Holzammer, for his part, indicated how important the corporate strategy is for the ongoing and future success of the Company and how it was implemented last year. In addition, he highlighted that through its own strengths Autoneum had managed to improve its operating result in all four regions and to position itself well for the future.

Chairman Hans-Peter Schwald and the other members of the Board of Directors Rainer Schmückle, Liane Hirner, Norbert Indlekofer, Michael Pieper, Oliver Streuli and Ferdinand Stutz were confirmed in office for another year. Hans-Peter Schwald, Ferdinand Stutz and Oliver Streuli were re-elected to the Compensation Committee. Newly elected to the Compensation Committee was Norbert Indlekofer.